Відео

Yo los fabrico en la planta

Where are the tail lights and lic. Plate location

I have a 7 x 14 Sure-Trac Utility Trailer and love it! 🙂👍👍👍

That's sweet !

I think those wheels should be out about 4" more on both sides, with optional 4" lift on spring shackles to frame, in other words wheels should be almost even with outer edge of dump body....... The problem I have with ALL ALL ALL bigger dump trailers is the wheels are outside the dump bed, and the dump beds is at 60" wide, 60" is to wide for me, but 54" is just right. So far this is the closest size trailer for me I found anywhere.....

Is that gravity down ? How much gross weight is left minus the tare weight

Definitely enjoyed my 2011 sure trac tilt bed, about time for a new trailer again, you don't make the steal one you only make the aluminum one now, this is the next option

I have this trailer, except mine has a folding gate. Great trailer, I love it. One recommendation is to add an option for a tongue box. I always need some place to stow my straps and a battery box for a trailer winch when the UTV is broken and needs to get on the trailer.

Where can I buy trusses for this trailer? 8’6” wide. My trailer caved in from snow.

I have a sure-trac and I wish you would offer an optional hoist upgrade to your lower end models. I'm going to upgrade with a Load Trail with a scissor hoist standard equipped.

I have been happy with my 16’ gooseneck telescopic dump, with low sidewalls. It is not as fast as a scissor lift, but never stresses with heavy loads. I use it to move my excavator and a couple extra D rings would be appreciated. And this is a small complaint but you may want to find a new zero fitting supplier, I had 3 of yours break off with the first use. All considered, the trailer is well made and has served me well. I use it almost daily around our farm.

Can you get a wireless remote? 🙂👍

How many yards of mulch will the 6x12 3-board highside hold?

I just ordered a 6x12 tandem axle tube top utility trailer through my dealer. I’ll be taking delivery the first week of February ‘24. I’m really looking forward to it! I plan to haul firewood and a water tank to the campground with it. I’ll also be starting a UA-cam channel in the spring to showcase our adventures with the new Sure-Trac trailer!

I just bought a brand new Sure Trac 5x8 utility trailer and the whole gate is rusting and there's rust all over the frame on top and underneath. It is only a month old.

Give me that for Xmas gift?

How much drive on weight can these gates handle?

Hi, I just bought this trailer, mine does not tilt as quickly upon unlocking without standing on the end and bouncing up and down to force it to drop, it takes about 1 minute to drop and takes about 1.5 minutes of myself bouncing to flatten out to lock. I find this very annoying as I need to use this trailer in the dead of winter in Winnipeg in Canada. How can the piston pressure be changed or reduced for my trailer to operate as the one in your video?

Just out of curiosity. Why wouldn’t the pro series have a telescopic dump cylinder?

I like your trailers! I have a 7 x 14 Utility Trailer.

Love my Sure-Trac trailer!

Nice one👍🏻

What is the price of this trailer please comment back

Where do I find the barlock spacers?

How long are the ramps?

What is the difference between the standard gate and the upgraded gate?

🙂👍👍👍

Nice! 🙂👍👍👍

Nice one!👍🏻

Does this trailer have trailer brakes, and a leaf suspension?

do you have heavier springs that can be installed. i just bought the 9900 version with the longer tailgate and its still a little hard on the back. When you mow grass for a living you have to open and close this thing 20 times a day. or do i have to install the gator lift on it also?

Is it normal for the sure trac gates to be hard to latch and unlatch. I walked through my local dealer and the 2 trailers I was interested in 7x12 and 6x12 I could not get the latches to latch the gate in the upright position. I’m a strong male, and could not do it. I think maybe the holes needed adjusted with a grinder or something. Odd that this was on BOTH trailers I wanted to buy. It has me second guessing the purchase.

What size trailer is this?

Telescopic is just to flimsy. Id be terrified of not being on perfectly flat ground. Also, if you bump, or drop something on that lift its gonna mess it up. Scissor lift or dual ram all the way.

Great video !!!! Subscribed!

Love this trailer pretty nice little trailer and the removable tongue is awesome and it’s hydraulic dumping. How much are these wow. I love the ramps that are actually part of the trailer pretty sweet

I’m interested in something like this.

We have bought 2 Sure-Trac trailer and they're very expensive. Getting parts for them takes way to long. We've been waiting 3 months for a replacement axle ordered from one of their dealers. They don't carry anything... everything has to be ordered by the dealer from Sure-Trac, for us... this has been a very slow process. The "Find a Dealer Link" seems fine for buying a trailer, but many shops like ours are quite capable a repairing our equipment... if the dealer stocked parts or could get them in a reasonable amount of time... fine, otherwise it would be nice to get them directly from the OEM, I think they must make them as they build them and have no stock of parts??? UPDATE: After contacting Joe we're getting our axle Monday. Great support at corporate!

Use one for my case 1840 skid steer, it's perfect. People look at me like I'm nuts hauling a skid steer on a one axle trailer using a f150 3.5 eco boost, but its well within the weight rating. I have a 6.5 x 12, 10K sure-trac single axle, my skid steer is 5,560 pounds, trailer payload capacity is 7,700 pounds. With 15 percent tongue weight I get a trailer axle weight of 6,585 pounds, trailers GWAR rating is 8,000 pounds. My trailer gross weight is 7,750 pounds, trailer max GVWR is 9,900 pounds. Have also hauled a deere 30G mini excavator on it a few times, 7,220 pounds operating weight, and it's within the weight rating.

What's the weight capacity of the gate?

Great!

this is pretty confusing. The tamper proof screws 3/8 x 1” are pretty hard to find in a course thread. You call them bolts in the video, but I don't see a fine thread bold holding very well. Can you help us out here? I think a lot of people (like me) bought the hinge and are struggling with this part. Is there a reason you don't just put a bolt through the wall like you do with the door? Thank you!!!

I have a John Deere 1025R subcompact tractor with loader and Mower Deck. Fully loaded with ballast weight and operator its probably just over 3,000lbs. Are the aluminum gates on the landscape trailers able to handle that much weight when loading/unloading? Or, do you offer a HD Gate or just ramp option on the landscape trailer. To be more specific I am looking at 7x14 7k Tandem Axle ATV to Tube Top Style.

Dump on level ground? Have these guys ever worked an actual day in their lives? 🤣 These trailers are used and abused, make em tough and don't worry about the rest lol